阻止温度上升剂 HOLPOSON® COOL-COMBO

阻止温度上升剂

HOLPOSON® COOL-COMBO

夏日炎炎，日光强烈，阳光是有能量的光线，其中包括远红外、可见光、紫外线等。深色黑色面料会吸收可见光并转化为热量，使深黑色面料升温速度**白色浅色面料。HOLPOSON® COOL-COMBO是专为服装面料开发的阻止温度上升系列助剂，是由三种组分的助剂组成的温度上升整理剂，当纺织品面料曝光在阳光下时能屏蔽紫外线，并释放阻止温度上升因子，可以有效的降低面料表面的温度。

一、物化性能             

HOLPOSON® COOL 1

外观  白色液体

离子性  非离子

pH  6.0-7.0

HOLPOSON® COOL 2

外观  白色偏黄色液体

离子性  非离子

pH    6.0-7.0

HOLPOSON® COOL 3

外观  白色半透明液体

离子性  弱阴离子

pH  4.0-6.0

二、使用方法

1.浸轧法

稀释方法:先将COOL 1，COOL 2，COOL 3按照以下比例化料 。再一边搅拌一边慢慢加水 ，稀释到所需要的浓度。

用量：

HOLPOSON® COOL 1： 40 -80g/l

HOLPOSON® COOL 2 ：20 -50g/l

HOLPOSON® COOL 3 ：30- 50g/l

处理方法:一浸一轧， 带液率在75%左右, 120-170摄氏度以上烘干定型

注意事项

1. HOLPOSON® COOL 3在应用过程中可能会使面科颜色变浅,请事先确认好颜色样品。

2. HOLPOSON® COOL-COMBO系列的三种组分的助剂都采用冷水或温水( 30- 40度)化料，可保证产品良好的加工稳定性和持久效果。

贮    存

包装: 25KG塑料桶,贮存期为12个月。

室内存放，避免高温、严寒。

Heat-Up Inhibiting

Finishing Agent

HOLPOSON® COOL-COMBO

The summer is scorching, the sunlight is strong, and the sunlight is light with energy, including far-infrared, visible light, and ultraviolet rays. The dark black fabric absorbs visible light and converts it into heat, making the dark black fabric heat up faster than the white and light colour fabric. HOLPOSON® COOL-COMBO is a series of additives to prevent temperature rise specially developed for clothing fabrics. It is a temperature rise finishing agent composed of three-component additives. When textile fabrics are exposed to the sun, it can shield ultraviolet rays and release to prevent the temperature rise factor , then it can effectively reduce the surface temperature of the fabric.

Physical & chemical properties:             

HOLPOSON® COOL 1

Appearance:               White liquid

Ionicity:                   Non-ionic  

pH value:                  6.0-7.0

HOLPOSON® COOL 2

Appearance:               White yellowish liquid

Ionicity:                   Non-ionic  

pH value:                  6.0-7.0

HOLPOSON® COOL 3

Appearance:                White translucent liquid

Ionicity:                    Weak anionic  

pH value:                   4.0-6.0    

Usage:

1. Padding process

Dilution method: First dissolve COOL1, COOL 2 and COOL 3. Then add water slowly while stirring. Finnaly dilute to the required concentration.

Dosage:

HOLPOSON® COOL 1: 40-80g/L

HOLPOSON® COOL 2: 20-50g/L

HOLPOSON® COOL 3: 30-50g/L

Treatment method: Dip and roll once, with liquid rate of about 75%. Drying and heat setting above 120-170 ℃.

Attentions:

1. HOLPOSON® COOL 3 may make the color of treated materials lighter, therefore please confirm in advance the color sample.

2. Dissolving of the COOL series requires cold water or warm water (30-40℃), which can ensure stability in process and lasting effect.

Storage:

1. Package: 25kg/plastic barrel. Storage time: 12 months

2. Store indoor, avoid overheat and severe cold